A distributor in the Netherlands buys a hazardous cleaning concentrate from a formulator in Belgium, applies its own private-label artwork, and sells it into France and Germany. The formulation never changed. The safety data sheet looks correct. Yet from January 1, 2027, that distributor may carry its own poison centre notification duty in every one of those markets.
That scenario sits at the center of the new PCN obligations for distributors under the revised EU CLP Regulation. Recent enforcement data shows why regulators care. In its February 2026 pilot project report, ECHA’s Enforcement Forum found that 19% of the 1,597 hazardous mixtures inspected across 18 EU/EEA countries had not been notified to poison centres where notification was mandatory.
For enterprises that distribute, rebrand, or relabel mixtures across Member States, closing that gap is a data management problem. It has to be solved before the deadline, not after an inspection. Teams that want to see how centralized SDS data supports that work can schedule a demo with TotalSDS by Enhesa.
Key Takeaways
- From January 1, 2027, Article 45(1c) of the revised CLP Regulation makes distributors duty holders when they supply hazardous mixtures to other Member States or rebrand or relabel them.
- A distributor is exempt only when it can demonstrate that the relevant appointed body already holds the information from the importer or downstream user.
- ECHA’s pilot found missing notifications, missing UFIs, and dossiers that contradicted the SDS. Those are data control failures, not awareness failures.
- A UFI printed on a label does not prove a product is notified under that trade name or in that country.
- The strongest preparation is one controlled source of composition and classification data feeding the SDS, the label, and the notification.
What Did ECHA’s PCN Enforcement Pilot Find?
ECHA’s Forum pilot checked whether hazardous mixtures on the EU market had been notified to poison centres, and whether the notified data matched the label and the SDS. Inspections ran from January to June 2025, and the Forum published its pilot project report in February 2026. Roughly one in five mixtures that required notification had none, and a meaningful share of notified products carried inconsistent data.
| Finding | Rate | What It Signals |
|---|---|---|
| Mixture not notified where notification was mandatory | 19% | Unclear duty holder roles or missing market coverage |
| PCN dossier inconsistent with the SDS | 17% | Composition or classification changes that never reached every record |
| UFI missing from the product label | 15% | Label artwork managed separately from notification data |
| Product label inconsistent with the notified dossier | 13% | Label content updated on a different cycle than the notification. |
The same report shows downstream users were both the largest group of notifiers (44%) and the group with the highest share of non-compliance (28%) – a comparable share of importers and distributors accounted for the rest. Where inspectors found non-compliance, written advice was the most common response, followed by verbal advice, administrative orders, fines, and criminal complaints.
A pilot sample is not a representative estimate of the whole EU market. It is, however, a clear view of what inspectors check: the notification, the UFI, and whether the label and SDS tell the same story as the dossier.
One detail matters for anyone holding legacy stock. During the project, ECHA revised its Q&A guidance on June 4, 2025. The interpretation is now that mixtures on distributors’ shelves can no longer be supplied further if a UFI is not affixed to their label. Old inventory without a UFI is not grandfathered.
What Changes for Distributors on January 1, 2027?
Regulation (EU) 2024/2865 adds Article 45(1c) to the CLP Regulation, making certain distributors duty holders for poison centre notifications. The duty applies from January 1, 2027, when a distributor supplies a hazardous mixture into another Member State or rebrands or relabels it. A distributor avoids a separate notification only by demonstrating that the relevant appointed body already received the necessary information upstream.
Several other CLP amendments now apply from January 1, 2028, as Belgium’s Federal Public Service for Public Health notes. That postponement does not move the distributor notification date, which is a common point of confusion in planning conversations.
Which Distributors Does Article 45(1c) Affect?
Article 45(1c) affects distributors whose activity changes where a product is sold or how it is identified. The practical test is whether a poison centre in the destination country could identify your product from the information already notified.
- Cross-border distributors: a notification made for one Member State does not automatically cover another. Confirm the existing dossier covers each new country before you supply it.
- Private-label and rebranding programs: a new trade name is a new product identifier. The notification needs to include it even when the formulation is identical.
- Relabellers: label changes that alter product identifiers bring the same obligation.
- Repackagers and refillers: ECHA treats them as downstream users with direct notification duties under Article 45 today. They should not wait for 2027.
- Resellers of unchanged products in markets the supplier already notified sit outside the new trigger. They still cannot place a non-compliant mixture on the market.
How Can a Distributor Close a Notification Gap?
A distributor can close a gap in one of two ways, according to ECHA’s guidance on the new distributor role. It can provide the necessary information to its supplier or the original notifier so they include it in their submission. Or it can submit its own poison centre notification.
The first route is usually faster, because the upstream notifier already holds the full composition. The second route requires composition, hazard, product, and use information, which non-EU suppliers in particular may treat as confidential. Either way, keep evidence tied to the specific product and country of sale. A generic letter stating a product is “PCN compliant” will not hold up well in an inspection.
Why Do SDS, Label, and PCN Data Fall Out of Sync?
They fall out of sync because the three records are usually owned by different teams, kept in different systems, and updated on different cycles. Regulatory affairs owns the SDS, packaging or marketing owns the label artwork, and the dossier sits in IUCLID or the ECHA portal. When a formulation changes, each record is updated separately, and one of them usually lags.
In multi-site enterprises, the common failure points look like this:
- R&D approves a formulation change with no trigger to review the UFI and the dossier.
- Trade names and customer-specific aliases live in spreadsheets instead of the master product record.
- Supplier SDS revisions arrive by email and are never compared against the notified composition.
- Language versions of SDSs and labels are maintained as separate files that drift from the source.
Composition in Section 3 and toxicological information in Section 11 deserve the closest review. A formulation change shows up there first, and poison centres rely on that data most. For a broader view of how that information travels between suppliers and customers, see how safety data sheets move through the supply chain.
What Are the Risks of Waiting Until 2027?
Waiting turns a documentation task into a market access problem. Under Article 4(10) of CLP, a mixture that does not comply with the regulation cannot be placed on the market.
- Delayed launches: an unnotified trade name can stall entry into a new Member State.
- Stranded inventory: legacy stock without a UFI cannot be supplied further.
- Enforcement exposure: pilot outcomes ranged from advice to fines and criminal complaints, and ECHA’s enforcement projects, like REF-14 project on classification and labelling of mixtures, keep SDSs and notifications under inspection.
- Slower emergency response: inaccurate data delays poison centre advice after an exposure, which is the harm the rule exists to prevent.
How Should Distributors Prepare for the 2027 PCN Requirements?
Preparation starts with knowing exactly which products you sell, under which names, in which countries, and who notified them. From there, the work is aligning three records and putting change control around them.
- Build a product-market matrix. For every in-scope mixture, record the supplier, formulation reference, each trade name, the UFI, destination countries, and label version. Include existing stock.
- Confirm your role product by product. One company can be a distributor for one SKU, a rebrander for another, and a downstream user for a refilled product.
- Prioritize cross-border and private-label SKUs. These are the products Article 45(1c) targets.
- Request evidence, not assurances. Ask upstream notifiers for submission reports that name the markets, trade names, and UFIs covering your products.
- Align the SDS, label, and dossier. Check that trade names, hazard classification, label elements, and UFI placement match across all three. For mixtures for industrial use and unpackaged mixtures, Annex VIII allows the UFI to appear in SDS Section 1.1 instead of on a label.
- Put change control in place. Any change to composition, classification, or trade name should trigger a UFI and notification review before the product reaches the market. ECHA’s one UFI, one composition rule is the reference point.
- Assign responsibilities in contracts. Define who updates the notification when a destination market or product identity changes.
Manual Tracking vs. Centralized Compliance Data
A spreadsheet can work for a narrow portfolio. It tends to break once a distributor manages hundreds of SKUs, several brands, and multiple languages.
| Task | Spreadsheets and Shared Drives | Centralized SDS Platform |
|---|---|---|
| Tracking trade names and aliases | Separate tabs that go stale | Linked to the master product record |
| Applying a formulation change | Each SDS and language version edited by hand | Updated once at ingredient or product-family level |
| Proving SDS version history | File names and email trails | Revision and review dates tracked per document |
| Adding a new market | Effort grows with every country | Templates and regulatory updates applied across products |
“Most PCN gaps we see are not about the notification itself. They start months earlier, when a formulation or trade name changes and the SDS, the label, and the dossier get updated on different timelines. When those records share one source of data, the notification becomes a routine step instead of a scramble.” – Veronica Marrero, Director of Professional Services and Regulatory Operations
Where Does SDS Software Fit Into PCN Readiness?
SDS software does not replace the poison centre notification, which is still submitted through ECHA’s systems. It holds the composition, classification, and product identity data that the notification, the SDS, and the label all draw from. When that data is controlled in one place, consistency stops depending on manual reconciliation.
Many enterprises replace document-by-document authoring with a centralized platform such as SDS Author by Enhesa. Data is entered once at the ingredient, product family, or system level and applied to every product that uses it. Mass product updates carry a change across a portfolio instead of one SDS at a time. For private-label programs, an existing SDS can be duplicated and edited into a white-label version, and the platform supports authoring under multiple manufacturers.
Downstream of authoring, TotalSDS Manager gives distributors a searchable SDS library with customer-specific alternative names, location assignments, and revision and review date tracking. Select packages add reporting on ingredient name, CAS number, and concentration, which helps when checking a supplier’s SDS against what was notified.
Where internal capacity is limited, TotalSDS professional services cover SDS authoring for any global jurisdiction and technical SDS translation by native professional translators. The team also provides regulatory consultation, including guidance on submissions such as poison centre notifications.
Need support preparing SDSs and labels for multiple EU markets? Request a quote from the TotalSDS regulatory team.
Prepare Your EU Portfolio for the 2027 Distributor Rules
The 2027 date is fixed, and ECHA’s findings show where inspectors look first: missing notifications, missing UFIs, and records that disagree. Distributors that map products to markets now, and connect SDS, label, and notification data to one source, will spend 2027 selling rather than remediating.
If your organization is looking to simplify SDS authoring and keep hazard communication consistent across EU markets, TotalSDS by Enhesa provides enterprise-ready software and regulatory support built for that work.
*This article provides general regulatory information, not legal advice. Confirm specific obligations against the official regulatory texts and current ECHA guidance.
Frequently Asked Questions
What Are the PCN Obligations for Distributors Under the Revised CLP Regulation?
From January 1, 2027, PCN obligations for distributors apply when a distributor supplies a hazardous mixture into another EU Member State, or rebrands or relabels it. The distributor must make sure the relevant appointed body has the required emergency health response information. It can do that by having the upstream notifier extend its notification or by submitting its own. The duty does not apply if the distributor can demonstrate the information already came from the importer or downstream user.
Does Rebranding a Mixture Require a New UFI?
Not necessarily. The UFI is tied to a mixture’s composition, so an unchanged formulation sold under a new trade name can keep its existing UFI. What changes is the notification, which must include the new trade name so poison centres can identify the product. If the composition changes, a new UFI and an updated notification are likely required.
Where Does the UFI Go on a Safety Data Sheet?
Under Annex VIII of CLP, the UFI is placed in Section 1.1 of the SDS for mixtures for industrial use and for unpackaged mixtures, where it can replace the label requirement. Mixtures for consumer and professional use carry the UFI on the label. Whichever placement applies, the UFI must match the one in the notification for that market.
Can Distributors Keep Selling Existing Stock Without a UFI on the Label?
No. The final Annex VIII transition period ended on January 1, 2025. ECHA’s revised Q&A interpretation from June 2025 is that mixtures on distributors’ shelves can no longer be supplied further without a UFI on the label. Legacy stock needs to be relabelled with a valid, notified UFI or withdrawn.
Does TotalSDS by Enhesa Help With Poison Centre Notifications?
Yes. The TotalSDS by Enhesa regulatory team provides guidance and guidance materials on regulatory submissions such as poison centre notifications. That support sits alongside SDS authoring, hazard classification support, and label development. For scope beyond guidance, such as help preparing a specific notification, confirm the details when you request a quote from TotalSDS professional services.
How Does TotalSDS Keep SDSs Consistent Across EU Markets and Languages?
SDS Author stores data at the ingredient and product-family level, so one change updates every affected SDS. As regulatory updates become available, the software is updated to generate revised hazard classifications, label elements, and template changes. Native professional translators handle technical SDS translations. To see the workflow on your own portfolio, schedule a demo.

